:html> " />
Arcusblade graphic curve.
ARCUS Logo Compass draws it, ARCUS cuts it.
Compass draws it,
            ARCUS® cuts it
Arcus Inc.  PO Box 991548   Louisville, KY  402619-1548  Email: sales@arcusblade.com    ©2009 Arcus Inc. All Rights Reserved
Designed to cut arcs, curves, and plunge cut circles with a contoured shaped framing for wood, diamond, and steel blade with a compass guide.
ARCUS® Curve Cutting System
Arcus Inc.  PO Box 991548   Louisville, KY  402619-1548  Phone:  502-495-2959  Email:  sales@arcusblade.com
This Nodding Ogee Arch was cut freehanded in 2 minutes and is 4 feet tall and 9 feet wide.
Curves Cut In Pine 2 x 12  radius 17 inches larger
Maple 1” arch  41” w  49” h  circle diameter 38”
Curve OSB
 54" h  4" w
Freehanded Cuts
 Decks, wood and composite no sanding needed
Plywood 30"  diameter circle
Hoop 43"  diameter
Table 1" Maple Top  35" diameter
             Legs 1" Oak  39" h
    Oak 1"
38" h  5" w
Plexiglas® ¼"   circle 36" diameter
Cuve cut Oak 1 inch 40 inches height by 2 inches wide.
Round or Circle Plexiglas or Plastic 1/4 inch 36 inch diameter.
Plywood 30 inches diameter round or circle
Curved Deck and Seating Cuves material wood and composite no sanding needed.
OSB Material Hoop is 43 Inches diameter and 3/4 inch wide.
Oak Table Legs Curved 1 inch 40 inches in height 2 inches wide.
Wave or S Curve out of OSB Material 54 inches in height and 4 inches wide.  It is painted black because this was my first cut ever on circular saw after inventing it the ARCUS Curve Cutting Wood Blade.
Round Maple Table Top 35 inches diameter with legs out of 1 inch oak that are 39 in height.
Arch Maple with Circe in Center -<wbr> Maple 1 inch arch 41 inches w 49 inches in height circle diameter 38 inches.
Oak 1"
40" h 2"w
This Nodding Ogee Arch was cut freehanded in 2
minutes and is 4' tall and 9' wide
Curves Cut in Pine 2" x 12" Radius from 17" and larger
Photos of Curves and Circles in Plywood, Pine, OSB, Maple,  Plastic