:html> " />
pp99617764.jpg
Arcusblade graphic curve.
ARCUS Logo Compass draws it, ARCUS cuts it.
Compass draws it,
            ARCUS® cuts it
Arcus Inc.  PO Box 991548   Louisville, KY  402619-1548  Email: sales@arcusblade.com    ©2009 Arcus Inc. All Rights Reserved
Steel
Designed to cut arcs, curves, and plunge cut circles with a contoured shaped framing for wood, diamond, and steel blade with a compass guide.
ARCUS® Curve Cutting System
pp4636e661.jpg
Arcus Inc.  PO Box 991548   Louisville, KY  402619-1548  Phone:  502-495-2959  Email:  sales@arcusblade.com
ARCUS® Contoured Masonry Blade  Premium
Turbo Diamond / Cuts 8 Inch Radius & Larger
Use a wet tile saw and cut inside and outside curves at same time in marble, granite, travertine, and porcelain tile.
Use a wet tile saw & cut inside
and outside curves at same time.
Cut marble, granite, travertine,
and porcelain tile.
Maximum depth of cut in concrete at 15 inch radius is 1 1/2 inches and a cut at 24 inch radius in concrete is 2 inches. Recommend more than one pass using the Compass Guide for longer blade life.  This cut was done dry but wet the blade last longer and cut is smoother.
Using the ARCUS Curve Cutting System backer board is 1/2 inch and a 30 inch diameter cut is a plunge cut for a precision cut with smooth edges. A wave was cut with a 15 inch radius cut from one side until apex, then cut from other side to met at the apex center.
A curve was cut on a wet tile saw in granite with a 15 inch radius clean smooth edges.
Clean edges of a curve cut in travertine tile has a rdius of 15 inches and was done on wet tile saw.
This Curve Cut in Porcelain Tile was cut in 45 secounds and has smooth edges no grinding.
pp1177edc3.jpg
Using the ARCUS Curved Cutting System cut perfect circles from 30 inches to 54 inches in diameter. The compass guide comes in larger sizes for making larger circles and curves.
How to Cut Acircle in Tile: Use Our  Tile Circle Cutter
Maximum depth of cut in concrete at 15" radius is 1½"
and a cut at  24" radius in concrete is 2".   (Recommend
more than one pass using the Compass Guide for
longer blade life).  
Using the ARCUS® Cutting System cut perfect circles from 30"
to 54"  in diameter.  The Compass Guide  comes in larger
sizes for making larger circles and curves.
pp78efe654.jpg
Using the ARCUS® Cutting System the above ½" backer board 30"
diameter cut was plunge cut for a precision cut with smooth edges.
The wave curve cut is has a 15 inch radius and was cut to apex and
then cut from the other direction to meet in center.
Travertine Tile
2 radii 8 inches were cut in a curve
Travertine Tile 15 inch radius
with clean smooth edges.
Granite 15 inch radius
In center of tile 2 radii were cut 8 inches to form design like a petal a jig was used.
• For cutting and scoring concrete, stone,
  brick, block, stucco, backer board and tile
  with precision, speed and ease.
• Use Dry / Wet
• Cuts inside and outside Radius , 15” & Larger
• Diameter 7" Arbor 5/8" / 7/8" insert for tight
 curves
• Rim Thickness  2.286 mm /. 09"
• Rim Height 10 mm/.3937"     
• Plate thickness 1.6 mm  .06299"   
• Cut in concrete width 1/8" / 3.1 mm
• Cuts up to a 2" depth at 24" radius & up
• Right Blade / Direct Drive Saws
• Left Blade / Hypoid, Worm Drive Saws
Freehand Or Plunge Cut For
Decorative Concrete Designs
2" Concrete Curve Cut
The curve cutting contoured blade when
lying flat has a height of ¼".  Check your
saw for enough clearance for  the blade
so it does not rub when mounted in the
saw. Does not fit all circular saws.
pp443c47e8.jpg
ppfb46f7d4.jpg
pp12eaf701.jpg
pp655396c9.jpg
pp67efe9a0.jpg
pp3e0f5967.jpg
ppb53c07df.jpg
ppe5d612d9.jpg
ppdce6dfe5.jpg
pp8cf7a688.jpg
ppf372236d.jpg